C Program
Subject and UNIT: Programming in C: Unit I (b): Introduction to C
Many a time the meaning or the purpose of the program code is not clear to the reader. Therefore, it is a good programming practice to place some comments in the code to help the reader understand the code clearly.
Subject and UNIT: Programming in C: Unit I (b): Introduction to C
C is a compiled language. So once a C program is written, you must run it through a C compiler that can create an executable file to be run by the computer.
Subject and UNIT: Programming in C: Unit I (b): Introduction to C
The source code file contains the source code of the program. The file extension of any C source code file is ‘.c'.
Subject and UNIT: Programming in C: Unit I (b): Introduction to C
To write a C program, we first need to write the code. For this, open a text editor. If you are a Windows user you may use Notepad and if you prefer working on UNIX/Linux you can use emacs or vi.
Subject and UNIT: Programming in C: Unit I (b): Introduction to C
A C program is composed of preprocessor commands, a global declaration section, and one or more functions
Subject and UNIT: Programming in C: Unit I (b): Introduction to C
The programming language C was developed in the early 1970s by Dennis Ritchie at Bell Laboratories to be used by the UNIX operating system.
Subject and UNIT: Programming in C: Unit I (a): Introduction to Programming
We now know that programming languages are the primary tools for creating software. As of now, hundreds of programming languages exist in the market, some more used than others, and each claiming to be the best.
Subject and UNIT: Programming in C: Unit I (a): Introduction to Programming
A programming language is a language specifically designed to express computations that can be performed by the computer.
Subject and UNIT: Programming in C: Unit I (a): Introduction to Programming
Computer software can be broadly classified into two groups: system software and application software.
Subject and UNIT: Programming in C: Unit I (a): Introduction to Programming
First is the computer hardware that does all the physical work computers are known for.Second is the computer software that commands the hardware what to do and how to do it.
Subject and UNIT: Basic Electrical and Electronics Engineering: Unit V: Measurements and Instrumentation
The system used for data processing, data conversion, data transmission and data storage is called data Acquisition system
Block diagram, Acquisition Methods, Advantages, Application
Subject and UNIT: Basic Electrical and Electronics Engineering: Unit V: Measurements and Instrumentation
In the digital storage CRO the data can be stored in the memory. The memory can store data as long as required without degradation.